Suzuki 400 DRZ & DRZE Radiator Guard Installation Instructions

 Parts included:   1 set Radiator Guards (12-09)          2 ea. 6mm x 14mm SHCS

                          4 ea. 6mm x 25mm SHCS                 2 ea. 6mm x 30mm SHCS

                           2 ea. ¼ s.a.e. Flat Washer

1.      Remove side shrouds.

2.      Remove stock bolts from radiators. Remove tank bolts.

3.      Bolt radiator guards in place using the (4) 6mm x 25mm SHCS in the front & use the (2) 6mm x 30mm SHCS to attach at the tank bolt (as shown in picture #1) Tip: A ball-end hex allen wrench is the easiest way to install. Tip: Be sure to start bolts straight!

4.      Trim Plastic rib inside radiator shrouds as needed to clear the radiator guards. Approx. 3/8” (as shown in Pic #2)

5.      Reinstall, side shrouds using the (2) 6mm x 14mm SHCS along with the flat washers.

6.      Roost!

         Picture #1

         Picture #2

For Questions or Comments contact us at 1-877-375-5527 toll free or

e-mail to Support@FlatlandRacing.com