Honda CR & CRF Radiator Guard Installation Instructions

Honda CR & CRF Radiator Guard Install Honda CR & CRF Radiator Guard Install Honda CR & CRF Radiator Guard Install

2002-03 CR & CRF 125/250/450
Part #12-13, 12-16 & 12-17

Parts included:
(1) Set radiator guards
(2) 6mm x 25mm washer/hex bolts
(4) 6mm x 25mm square head cap screws

1. Remove side shrouds.

2. Remove stock louvers and set aside. Remove stock bolts from radiators and set aside.

3. Install radiator guards on radiators, using 6mm x 25mm
square head cap screws (provided) in radiator mount holes, (as shown in picture #1).

4. Trim inside rib of side shroud (as shown in picture #2) approx. ¼"

5. Reinstall side shroud. Use washer/hex bolts for lower mount hole, (provided- as shown in picture #3). Use stock bolts through shroud through rear guard support.

6. Roost!

Call us toll free at 1-877-375-5527 with any questions!